SDSHobby
CONVERSION COMBO KIT FOR 30-35CC GASOLINE AIRPLANE CONVERTED TO ELECTRIC AIRPLANE (3.0IN SPINNER)
| Motor | 6350 370KV Brushless motor 14 pole |
| Size | 63mm*50mm |
| MAX power | 2000W, 93A |
| Diameter of axle | 8mm |
| ESC | 100A (without UBEC output) 3-7S Lipo |
| Spinner | 3inch, 1pcs |
| Electric Prop | 20*8 inch |
| Servo | 60g* 3pcs, 9kg |
| Servo Arm | metal arm*5pcs |
| One Set Banana Bullet Connector | ¢3.5mm*3 pairs, ¢6mm*2 pairs |
Basic Equipments for the Conversion Combo Kit:, Application Fields:, Special made for 30-35CC gasoline airplane converted to electric airplane.,
6-7S Lipo 5g*2pcs, 4kg (for elevator) One Set Mounting Post ...SDSHobby
CXK 5.8G 8 CHANNELS WIRELESS AV RECEIVER MODULE 5645-5945MHZ
| Receiving Frequency | 5645-5945MHz, 8 Channels |
| Receiving Sensitivity | -90dBm |
| Frequency Control | built-in frequency phase lock loop |
| AV output | analog AV signal output directly |
| Power Supply Voltage | 3.3.V |
| Supply Current | 170mA |
Specification:,
SDSHobby
BOSCAM TX5813 5.8G 13DBM WIRELESS AV TRANSMITTER MODULE WITH OVER 300M TRANSMITTING DISTANCE
| Transmitter frequency | 5705-5945MHZ |
| Transmitting power | 13dBm |
| Transmitting distance | further than 200 meters |
| Frequency control | built-in frequency and phase lock loop |
| AV input | analog AV signal input |
| Supply current | 110mA |
Specification:, Power supply voltage: 5V,
The frequency is Band E (factory default) , and we ...SDSHobby
BOSCAM TX5823 5.8G 23DBM WIRELESS AV TRANSMITTER MODULE WITH OVER 2000M TRANSMITTING DISTANCE
| Transmitter frequency | 5705-5945MHZ |
| Transmitting power | 23dBm |
| Transmitting distance | further than 2000 meters |
| Frequency control | built-in frequency and phase lock loop |
| AV input | analog AV signal input |
| Power supply voltage | 3.3V |
| Supply current | 330mA |
Specification:,
The frequency is Band E (factory default) , and we ...96 Reviews
SDSHobby
CHARGER V680-AC WITH BUILT-IN ADAPTOR
| - Charger power | max.80W |
| - Discharge power | max.10W |
| - Discharge current range | 0.1~2.0A |
| - Charge current range | 0.1-6.0A |
| - Current drain for balancing LiPo | 300mah/cell |
| - Data store | max.5 data of batteries |
| - Ni-Cd/Ni-MH battery cell count | 1 - 15cells |
| - Li-Po/Li-Lo/Li-Fe battery cell count | 1 - 6cells |
| - Trickle charging | 50-200Ma |
| Included | 1) AC Power Cord |
Advantages:, - Micro-processor controlled, Specifications:, - Input voltage: DC:10.5-18.0V;, AC:100-240V, - Pb battery voltage: 2V,
- Delta-peak sensitivity - Individual cell balancing - LiIo, LiPo, ...SDSHobby
CARBON FIBER PROPELLER 24*10 FOR 70-80CC GASOLINE AIRPLANE
Specifications:, Material:, Carbon fiber, Size:, 4x 10 inch, Aperture:¢, Net Weight:, 192g, Engine Size:, 70-80CC, Engine Power:, Gasoline, :, 6500~8000, Features:, Mold:, We imported the steels from Germany and Japan to make the mold., Centre Hub:, The centre hub is made of polyyoxymethylene resin, very strong and can not cause compressed cracks., Right and Left Edge:, Inside the propeller is carbon fiber silk, not hollow, the finish is a beautiful high gloss, clear epoxy gel-coat cover 3-storied 3K Black woven carbon fiber fabric., Balance:, Our propellers are CNC machined, and then hand finished to balance. All are factory balanced.,
9mm RPM (revolutions per minute)SDSHobby
COMBO MLD70 GAS ENGINE+ STARTER DRIVE FOR MLD70 ENGINE WITH ONE-WAY TRANSMISSION, SELF PROTECTION FUNCTION
| Brushless Motor | >3536 (such as 3542), KV value |
| Brushless ESC | above 60A |
| Battery | 3S-4S 2200mah 25C Li-polymer Battery, 60A (discharging current) |
| Displacement | 4.25ci (70cc) |
| Configuration | 2C single cylinder air-cooled |
| Carburetor | Walbro pump |
| Ignition | CDI Electronic ignition w/Auto timing advance / Champion Y82 Spark Plug (Compatible with CM6) |
| Power Supply | 7.2 V-8.4 V Lipo Battery |
| Weight | 4.73 lbs (75.8oz) including ignition, muffler, Mounting Accessories |
| Maximum Output | 6.6BHP |
| Maximum RPM | 8000 RPM |
| Idle RPM | 1200-1500 RPM |
| Fuel | Unleaded Gasoline |
| Oil | 2-cycle high performance (synthetic is recommended) |
| Prop Selection | 22*8-24*8 |
| Product Size | L158mm*W250mm*H150mm |
MLD70-START :, Specification:, Only a switch channel can easily realize engine start-up after fixing this equipment., Technical Parameters:, Mix: 1:30 to 1:45, Kindly Remark:, This is new MLD70 with new updated CDI (6.0V-8.4V) and with new Updated Metal Reed Valve.,
One-way Drive transmission makes sure Drive only transfer One-Way from ...SDSHobby
CESSNA 310 EPO FOAM PLANE ALMOST READY TO FLY BRUSHLESS VERSION (W/O REMOTE CONTROL AND BATTERY AND CHARGER)
| Material | EPO |
| Wing span | 1280mm |
| fuselage Length | 1100mm |
| Wing loading | 58g/ |
| Flying weight | 1200g |
| Servo | 9g*4 pcs |
| ESC | 30A, 2PCS |
| Brushless outrunner motor | KV3300, 2PCS |
| N.W.(KGS) | 3.87 |
| G.W.(KGS) | 5.0 |
| Battery | 11.1V 2200mah 20C Lipo battery |
| CTN SIZE (cm) | 118*46*89 (the carton size is for 4 pcs/ctn) |
Specifications:, Recommended equipments (need to buy separately):, More information:, This is the first Big Size Cessna 310 Grand Cruiser Twin Motor airplanes made by the hard material EPO in the market. The airplane has very nice Scale-Look and details. It has two preinstalled powerful brushless motor and 3-Blad Prop. All servos, Receiver and ESC are preinstalled from the Factory. The model is designed for Optional Electric Retract. Flaps are also designed in the wing and if you like to use plap for landing/Take off you need just to install two Micro servos in the wing (the place for flap servo is also designed in the wings). The surface of the EPO material in this model is extremely flat and strang. The complete model is made BY EPO which is very hard and it is the most crash-resistance material. The Building time is around 90 mins..., Note:,
d m2 With retract landing gear .4g RC 4channel ChargerSDSHobby
EME 120CC GASOLINE ENGINE/ PETROL ENGINE FOR RC MODEL GASOLINE AIRPLANE
| Displacement | 120cc |
| Weight | 2400g /engine, 160g/muffler, 150g/ignition |
| Carburetor | EME |
| Compression Ratio | 7.6 |
| Power | 12.2HP@7000RPM |
| Practical RPM | 1100~7200RPM |
| Thrust 1 | 27.2kgf (50~200M altitude) |
| Thrust 2 | 24.7kgf (1800~2000M altitude) |
| Spark Plug | EME/ NGK CM6 |
| Ignition Voltage | 4.8V~6.0V |
| Fuel | 91~93 Octane, 1 |
| Recommended Propeller | 2 blades 28*10, 28*12, 29*10 prop, or 27*12 3 blades prop |
Specifications:, Package Contents:, EME120 engine*1pcs,
Muffler*2pcs Ignition module*1pcs Spark plug*2pcs Stand-off spacer*4pcs Muffler screw*4pcs Muffler ...SDSHobby
EME60 60CC GASOLINE ENGINE/ PETROL ENGINE FOR RC MODEL GASOLINE AIRPLANE
| Displacement | 60cc |
| Weight | 1390g/engine, 180g/muffler, 140g/ignition module |
| Carburetor | Walbro |
| Compression Ratio | 7.6 |
| Power | 6.2HP@7200RPM |
| Idle RPM | 1350RPM |
| Practical RPM | 1350~7500RPM |
| Thrust 1 | 16.2kgf (50~200M altitude) |
| Thrust 2 | 14.7kgf (1800~2000M altitude) |
| Spark Plug | EME/ NGK CM6 |
| Ignition Voltage | 4.8V~6.0V |
| Fuel | 91~93 Octane, 1 |
| Recommended Propeller | 2 blades, 23*10, 24*8, 24*10(wooden prop, C.F. prop) |
| Spacer screw | M5*15 (front), 4pcs; M5*22 (rear), 4pcs |
| Spacer washer | M5*4 for rear mounting spacers |
Specifications:, Package Contents:, EME60 engine*1pcs,
Muffler*1pcs Ignition module*1pcs Spark plug*1pcs Stand-off spacer*4pcs Muffler screw*2pcs Muffler ...SDSHobby
EME35 35CC GASOLINE ENGINE/ PETROL ENGINE FOR RC MODEL GASOLINE AIRPLANE
| Displacement | 35cc |
| Weight | 960g/engine, 45g/muffler, 140g/ignition |
| Carburetor | Walbro |
| Compression Ratio | 7.6 |
| Power | 3.6HP@7100RPM |
| Idle RPM | 1550RPM |
| Practical RPM | 1550~7500RPM |
| Thrust 1 | 9.0kgf (50~200M altitude) |
| Thrust 2 | 8.1kgf (1800~2000M altitude) |
| Spark Plug | EME/ NGK CM6 |
| Ignition Voltage | 4.8V~6.0V |
| Fuel | 91~93 Octane, 1 |
| Recommended Propeller | 2 blades, 18*10, 19*10, 20*8(wooden prop, C.F. prop) |
| Spacer screw | M5*15 (front), 4pcs; M5*22 (rear), 4pcs |
| Spacer washer | M5*4 for rear mounting spacers |
Specifications:, Package Contents:, EME 35 engine*1pcs,
Muffler*1pcs Ignition module*1pcs Spark plug*1pcs Stand-off spacer*4pcs Muffler screw*2pcs Muffler ...SDSHobby
ELECTRONIC DIGITAL MICROMETER(0-25MM)
| Measuring range | 0-25mm 0-1’’ |
| Resolution | 0.001mm 0.00005’’ |
| Accuracy | 0.002mm |
| Power supply | one silver-oxide button battery SR44(1.5V) |
| Operating temperature | 0-+40°C |
| Storage temperature | -20-+70°C |
Specification:, Operation method:, , Notes:, 1., Trouble shooting:, , Battery replacement:, Unscrew battery lid with spanner circular back and put into the new battery(Outside for anode).,
Function Operation Remark ON/OFF Press (on/off) key. The character opened. ...SDSHobby
DJ80-V2 80CC GAS ENGINE/ PETROL ENGINE WITH SINGLE CYLINDER FOR RC GAS AIRPLANE
| 30 (lube oil) | 1 (gasoline) |
Performance & Parameters:, Spark Plug:, NGK CM-6, Carburetor:, Walbro (made in Japan), Displacement:, 80CC, Output Power:, 8.2HP/8000rpm, Weight:, 1800g (NOT Including CDI and Muffler), Cylinder Diameter:, 52mm, Stroke:, 38mm, RPM Range:, 1200 to 8000RPM, Recommended Propeller:, 3*10~26*8 (NOT Included), Compression Ratio:, 7.8, Mixture Ratio:, Package Contents:, Kindly Remark:,
DJ80-V2 engine*1pcs Exhaust Pipe*1pcs Rcexl CDI Ignition*1pcs Installation Parts*1pcs Propeller ...SDSHobby
D1000-PRO BALANCE CHARGER OUTPUT 20A/50W
Specifications:, DC Input Voltage Range:, 11.0-32.0V, Input Charge Current Range:, 0.1-40.0A, Charge Power Limited:, max. 1000W, Output Discharge Current Range:, 0.1-20.0A, Output Discharge Power Limited:, max. 50W, Energy Transfer Discharge:, max. 1000W, Balance Socket Charge Current:, 1.0A, Balance Tolerance:, ±, Ni-Cd/Ni-MH Battery Cell Count:, 1-26S, Lithium Battery Types:, LiPo, Li-ion, Li-Fe, Lithium Battery Cell Count:, 1-8 series, Pb Battery Voltage:, .0-36.0V, Digital Power:, 3.0-32.0V, Operational System:, graphical display,
0.01VSDSHobby
BRUSHLESS MOTOR WS2632 3500KV FOR KDS450 HELICOPTER
Specification:, Motor KV:, 1200, Max. Working Efficiency:, >90%, Max. Power:, 350W, Max. Rotating Speed:, 3500RPM/V, Shaft Diameter (mm):, 3.17, Motor Length (mm):, 35, Diameter:, 6, Working Current:, 11.1V, Working Voltage:, 32A, Weight:, 56g,
mm